User`s guide

2. Load the envelopes (address side up/flap side down) with the
corner of the stack set into the corner of the tray as shown (fig.
2.7).
3. Align the two envelope guides with the edges of the stack.
The guides must be neither too tight nor too loose. Adjust them
so that there is no room between the guides and the envelopes,
and so that the envelopes rest squarely in the tray.
4. Insert the cassette completely into the feeder tray.
Fig. 2.7 Load Envelopes in Tray
Chapter 2
Printer Use 2-15