User`s guide

Changing the Default Paper Cassette
The paper source default setting is automatic feed from the standard
tray. If you wish to change the default so paper feeds from the lower
optional cassette, you have two choices. The easiest way is to use
the PS Executive Series Utilities (see the utilities documentation
for directions). You may also use the following command:
The default paper tray change takes effect after the printer is
powered off and back on. The lower optional tray is known by the
printer as tray Ø. The upper standard tray is tray 1. To change the
default back to multi-purpose tray, simply change the Ø in the
above program to a 1.
C:\> edlin filename
New file
*i
1:*serverdict begin Ø exitserver
2:*statusdict begin
3:*Ø setdefaultpapertray
4:*^D
5:*^Z
*ex
C:\>
Chapter 9
9-6 PostScript: Technical Overview