Specifications
!
$)!,
The optional high-duty oil roller is the same size as the standard fuser
oil roller, so replacement follows the same steps. (Refer to chapter 5,
“Printer Care,” for illustrated instructions.)
1 Open the left-side fuser.
2 Remove and discard the old fuser oil roller.
Caution:
Oil on this roller will come off on your skin if touched
directly. Shield this roller from dust and toner when removing or
inserting into the fusing unit.
3 Align the colored label on the fuser unit with the colored
label on the high-duty oil roller.
4 Lower it into the fuser unit until it clicks.
5 Close the fuser unit.
)
If you have an optional large-capacity input feeder, you may choose
to have the printer automatically draw media from another cassette
(inputbin) when the current cassette empties. This is called cassette
chaining, and it provides a total media input capacity of 1,150 sheets.
»Note:
Check the documentation to see if your application includes a
specific procedure for using a multicassette printer.
$ '
There are four ways to enable/disable cassette chaining:
Use your application (check to see if your application supports
cassette chaining).
Select an alternate cassette for chaining in the QMS Level 2 Win-
dows printer driver.
On a network, use CrownAdmin to select the media cassettes
and/or the media source.