Specifications

!

)
"##
 
  
 
  !"!
Transparencies can also be fed from the multipurpose tray.
1 In the Operator Control/Media/For Upper Bin menu select
Transparency.
2 In the Operator Control/Outputbin menu, select Face-Up.
3 Insert the sheets printing
side down in the
media cassette.

Caution:
Do not fan
transparencies before printing.
4 Remove each transparency from the output tray as soon as it
prints.

Caution:
If transparencies are allowed to accumulate in the
output tray, resulting static electricity may cause a media jam.
1 In the Operator Control/Media/For MPT Bin menu select
Transparency.
2 In the Operator Control/Outputbin menu, select Face-Up.
3 Insert sheets printing side
up in the multipurpose tray
until they lightly touch the
feeding slot.

Caution:
Do not fan
transparencies before printing.