Specifications

!

"##

Rough envelopes or envelopes with clips

Self-adhering envelopes
»Note:
If acidic paper is used, characters may fade; in which case,
change to a neutral paper.


Sheets adhered with static electricity

Label sheets with the backing sheet exposed

Any media that is affected by high fusing temperature
(311° F/155° C)

1 Take a stack of about 250 sheets (
½ ream).

Caution:
Don’t unwrap paper above the printer as this might
cause paper particles to fall into the printer.
2 Fan paper to separate it and to help prevent static buildup
that may cause double feeding.
»Note:
Do not fan transparencies.
3 Take off the top and bottom sheets.
Residual glue buildup on these sheets may cause media jams.