Setup guide


$ 
)%#
5
The quality of your copied image depends on several factors. You
must consider these factors when judging the output quality of your
copied image. The quality of the copy can be adjusted by settings on
the CrownCopy menu. The factors involved in copy quality are


 The quality of the original


 The type of original
—
text, images, or both


 The size of the original


 The speed of your copy output
»Note:
Copies of both color and monochrome originals from the ADF
are subject to a gray background. Use the flatbed for cleaner copies.
'
To access the Copier Menu, press the Copy key once. Then use the
Next or Previous key to scroll across the top-level menus (Copy,
Number of Copies, and Copy Mode). To enter a lower-level menu or
select a menu option, press the Select key. Use the Menu key to back
out of the menu and return to IDLE after you’ve made your selections
or after you’ve completed copying.
»Note:
When you press the Copy key, you gain access to the Copier
menu. To return the printer to normal operation you can exit from this
menu by pressing the Menu key, leaving the copier idle for 60
seconds, pressing the Online key, or going back to do number of
copies. Error messages that normally occur (such as jams) will not
appear on the display until you exit from the Copier menu. Copier
menu changes stay in effect only for the next scan executed.



 Caution : Each configuration change you make affects the quality of
your printed output significantly. Therefore, we recommend changing
only one setting at a time, printing a test print, and then determining
if further configuration changes are necessary.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]