Setup guide

.1






























)'
2 Insert the copy key in the “Key” port on the printer’s inter-
face panel.


 Caution: Even though both the copy key and serial interface
have a DB-9 interface, the connectors are keyed, and they can’t
be interchanged. Make sure that you install the copy key only in
the port marked “Key.”
3 When the scanner is ready, place a document face down on
the scanner glass.
4 Make sure the printer is on line, and then press the Copy key
on the printer’s control panel.
The control panel message window displays
COPIER MENU
COPY
5 Use the Copier Menu/Copy Mode/Scan Size menu to set the
scan size of the document.
See “Menu Settings” on page 7-11 for details.
6 Press the Select key to display
COPY
READY TO COPY
7 Press the Select key again to begin copying.
8 When the copying is complete, remove the document.
(
#
To print multiple copies of multiple sheets from the scanner’s auto-
matic document feeder (ADF), we recommend that your printer have
a hard disk installed.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]