Setup guide
)
d Attach the terminator to the last external SCSI device (for
example, a hard disk drive) on the bus, and plug the other
end of the SCSI cable into the terminator.
6 Ensure that both the scanner and printer are turned off.
7 Turn on the scanner, wait 5 seconds, and then turn on the
printer.
Caution:
The scanner must be turned on first so the printer can
recognize the scanner’s presence.
"!#$%
!!&
(
!
)*!!+
'#
!!
!!
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500