Setup guide
#3#
'
6 Enable the password(s).
7 Save your changes and exit from the configuration menu.
8 Remove the security key, and store it in a secure location.
After you exit from the menu and remove the security key,
the Installation menu is removed from the control panel message
window.
9 Press the Online key to put the printer back on line.
#
Once a menu is password protected, you can’t enter the menu or
make changes in it until you enter a valid password.
»Note:
Password protection does not prevent software commands
from changing functions.
Default
Blank (no password)
Notes
Passwords are case sensitive and are entered as an
alphanumeric string.
If you choose a password that is not 16 characters long,
press the Select key until you get to the rightmost
character of the password field. Enter the password
character string the same as you would enter an
alphanumeric string. See chapter 4, “Printer
Configuration,” in the
Reference
for complete information
on how to enter alphanumeric characters.
Menu
Installation/Use Operator Pwd
Installation/Use Admin Pwd
Choices On
—Requires the correct password to access to the
Administration and/or Operator Control menus.
Off
—Does not require a password to access the
Administration and/or Operator Control menus.
Default
Off
Notes
Enter the passwords in the Installation/Operator Passwrd
and Installation/Admin Password menus.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500