Setup guide

#3#
'5%
This security key will enable the password menus. These menus
allow a system administrator to set a password and lock users out of
part or all of the configuration menu system.
!"$%


 A security key (9-pin connector labeled “Security”)
# 
1 Insert the security key into the “Key” port on
the interface panel.


 Caution: Even though both the security key and
serial interface have a DB-9 interface, the
connectors are keyed, and they can’t be
interchanged. Make sure that you install the
security key only in the port marked “Key.”
2 Press the Online key to take the printer off
line.
3 Press the Menu key.
4 Access the Installation/Operator Passwrd or
Administration/Admin Password menu.
You can use the Installation menu to password-
protect just the Operator Control menu, just the
Administration menu, or both.
5 Select the password(s).
Keep in mind that the password(s) you select
also protect the Admin mode of Remote Con-
sole, available through QMS CrownAdmin.
Menu
Installation/Operator Passwrd
Installation/Admin Password
Choices
Up to 16 characters (any letter, number, or symbol)
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]