Setup guide

6 .
$"9:
;.
& .
678
9%"
Attach the Jaz or Zip drive to which you’ll be restoring data from the
printer’s SCSI port or SCSI chain. Then access the Administra-
tion/Disk Operations menu, and then press the control panel keys in
the order shown in the following table. The printer responds by dis-
playing a status message in the message window (DSK refers to the
device, and
# is the device number).
»Note:
You may need to press the Next key one or more times to
advance through the list of selections or options.
Press this
key...
to... and the message
window reads...
Next Advance to the Disk Operations/
Restore Disk menu
DISK OPERATIONS
RESTORE DISK
Select Access the Restore Disk/Dsk#: menu.
RESTORE DISK
DSK
#x
Next or
Previous
Advance through the list of attached
devices.
RESTORE DISK
DSK
#x
Select Begin the restore process.
COPYING DATA
If the original backup required more
than one Jaz or Zip drive, the message
display prompts you. Be sure to insert
the drives in the proper sequence.
INSERT MEDIA
x
( x is the disk number)
You’re prompted when the backup
process has finished.
RESTORE COMPLETE
Menu
(several
times)
Exit from the configuration menu.
CONFIGURATION
ADMINISTRATION
Online Put the printer back on line.
IDLE
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]