Setup guide

$  
 .






























&

The following error messages may appear while you are using the
Disk Operations menu:
'"
»Note: While you’re making changes in the configuration menu, you
may also want to turn on the printer’s page recovery option. (Choose
On in the Administration/Engine/Page Recovery menu.) Page
recovery allows the printer to automatically track and reprint jammed
pages so you don’t have to resend jobs after clearing a jam.
/
1 Use the Administration/Memory/Disk Cache menu to
increase the disk cache size to 256 KB.
2 Turn the printer off and then on again.
3 Print a status page to check that the Disk Cache size is
increased. (Notice that VM remaining memory is also
increased.)
Message Meaning Action
FORMAT FAILED
The device cannot
be used.
Press the Menu key to remove
the message, and contact your
QMS vendor.
WRITE ERROR
The device
encountered a write
error, or there is no
room for the data on
the device or in RAM.
Press the Menu key to remove
the message, and restart the
operation from the beginning.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]