Setup guide

1" 
 .
&+ .
"
Access the Administration/Disk Operations menu, and then press the
control panel keys in the order shown in the following table. The
printer responds by displaying a status message in the message win-
dow (DSK refers to the device, and
# is the device number).
»Note:
You may need to press the Next key one or more times to
advance through the list of selections or options.
Press this
key...
to... and the message
window reads...
Select Access the Disk Operations/Format
Disk menu
FORMAT DISK
Select Access the Format Disk/Dsk#: menu.
DSK
#
:
Next or
Previous
Advance through the list of attached
devices.
DSK
#
:
Select Select the device and display a format
confirmation message.
ARE YOU SURE?
Select Begin the formatting process. While
the system reboots, the device is being
formatted.
FORMATTING...
Notify you when the formatting
process is complete. The printer then
powers up, and a startup page prints
(if enabled).
FORMAT COMPLETE
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]