Setup guide

2!&1
































14 Print an advanced status page.
a Using the Administration/Special Pages/Status Page Type
menu, change the status page type to Advanced.
a Using the Administration/Special Pages/Print Status menu,
print the status page.
The list of HP PCL fonts includes all of the new fonts. Keep
this status page for reference when accessing these fonts.
15 Ensure that the Administration/Memory/Disk Cache memory
client is set to at least 20 KB.


 Caution: You may need to decrease one of the other memory
clients before increasing the Disk Cache client. However, you
should do this only if you’re familiar with adjusting memory
settings. Incorrect use of this option could cause your system to
operate incorrectly.
,*
After you install the font SIMM and configure the printer, you’re ready
to access the fonts. Most applications handle font selection for you.
To access the fonts through your application, you must use an appli-
cation containing a compatible driver (for example, ProCollection
uses an HP driver). The driver lists each font by name or refers to the
fonts as a group.
%&'(# 
Use your PCL application to set the font for a single document. See
your application documentation for information.
%')'
Use the printer configuration menu to set the default font for all PCL
documents.
»Note:
Before beginning this procedure, you must have a PCL 5 font
list from the advanced status page you printed earlier in this section.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]