Setup guide

.-1
)/"010$%
 '*
"#
We recommend that you use CrownAdmin to download fonts. Refer
to the CrownAdmin online help for instructions.
"   $
This procedure contains the instructions for downloading the fonts
from a floppy disk onto your printer’s hard disk.
1 Connect the PC to the printer’s parallel or serial port.
2 Turn on the printer, and wait for IDLE to appear in the mes-
sage window.
3 Insert the font disk in your PC’s 3.5" disk drive, and change
to that drive (for example, if you’re using the A drive, type
a:↵).
4 Send the fonts to the printer’s hard disk.


 If your PC and printer are connected through the parallel port,
type
copy /b *.ps lpt
# ↵
where
# is 1 to 3. (/b refers to binary files.)


 If your PC and printer are connected through the serial port,
type
copy /b *.ps com
# ↵
where
# is 1 to 4. (/b refers to binary files.)
5 When the downloading is complete, reboot the printer.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]