Setup guide

/"































 
"#
We recommend that you use CrownAdmin to download an emulation.
Refer to the CrownAdmin online help for instructions.
"   $
1 Turn on the printer, and wait for IDLE to appear in the mes-
sage window.
2 Insert the emulation disk in your PC’s 3.5" disk drive, and
change to that drive (for example, if you’re using the A drive,
type a:↵).
3 Send the emulation to the printer’s hard disk.


 If your PC and printer are connected through the parallel port,
type
copy /b *.ps lpt#↵
where
# is 1 to 3. (/b refers to binary files.)


 If your PC and printer are connected through the serial port,
type
copy /b *.ps com
# ↵
where
# is 1 to 4. (/b refers to binary files.)
4 When downloading is complete, reboot the printer.
The emulation should be listed in the Options section of the
printer’s startup page, in the Administration/Emulation printer’s
configuration menu, and on the advanced status page.
"!$
»Note: Before you begin this procedure, your printer and PC (or UNIX
workstation) must be connected to an Ethernet network running
TCP/IP and have valid IP addresses.
1 If your PC is running Windows, change to DOS.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]