Setup guide

( 
#"
$%






























*
——


1 Switch to the MS-DOS prompt.
2 Create a new directory on your PC.
3 Change to this directory.
4 Insert the printer system software disk in your PC’s 3.5" disk
drive.
5 Type
x :pkunzip x :system↵ where x is the name of the disk
drive in which you inserted the system software disk.
6 Follow the prompts.
They instruct you to insert the system software disks in the follow-
ing order:
a Last disk (system software disk 3)
b Disk 1 (system software disk 1)
c Disk 2 (system software disk 2)
d Disk 3 (system software disk 3)
7 Turn on the printer, wait for IDLE to appear in the message
window, and then print an advanced status page.
Macintosh
Requires a connection from the
Macintosh’s serial port to the serial port
of the printer and either a null modem
cable or a standard serial cable with a
null modem adaptor attached.
Ethernet
Requires a 10BaseT/100BaseTX
connection to the printers resident
network interface or a connection to the
optional network interface.
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]