Setup guide
)'
,
If this happens... Do this...
Edges of the copy are
cut off.
Make sure you’re centering documents at the
top of the scanner glass and that the scan size
setting is correct. Also keep in mind that the
size of the scanned print cannot exceed the
printer’s maximum imageable area for the size
paper in use.
Scanner lamp flicker, is
dim, or fails to come on.
The scanner lamp is failing or has failed and
needs to be replaced.
Documents don’t feed
smoothly into the ADF.
Clean the ADF.
Several pages feed
into the ADF at the
same time.
Clean the ADF.
Multiple copies of a
multipage document in
the ADF are incomplete.
Increase the Display List memory client
(Administration/Memory/Manual Config/K Mem
Display menu).
Image quality of copies
is not optimal.
Clean the scanner glass: dampen a lint-free
cloth with alcohol or a mild detergent and wipe
the glass clean.
If you’re using an automatic document feeder
(ADF), clean it.
Copies of both color and monochrome originals
from the ADF are subject to a gray background.
Use the flatbed for cleaner copies.
If you’re scanning at 150 dpi, some printed
materials, such as magazines, cause moiré
patterns. To remove these patterns, change
the scan resolution to 200 or 300 dpi (choose
Copier/Copy Mode/Custom Color, and then
Copier/Copy Mode/Custom Config/Scan
Resolution/200 or 300).
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500