Setup guide


$ 
)&%#
 1 2
. '
Menu Copier Menu/Copy Mode/Scale Size %
Purpose Scale the copy.
Choices 50-200
Default 100
Note To scale a copy, set the scaling percentage and then press the
Copy key. Press the Online key
only after the copying has
finished. If you press Online before pressing Copy, the scaling
selection is not saved; your copy prints at the default 100%
scaling.
Moves to the upper-left of the page. The bottom of the page
may be cropped.
Menu Copier Menu/Copy Mode/Custom Config/Scan Resolution
Purpose Specify the resolution the scanner should use.
Choices 100, 150, 200, or 300 dpi
Default 200 dpi
Note In order to change the scan resolution, you must choose the
Custom Color option in the Copier/Copy Mode/Select Mode
menu.
Choose a scan resolution that is at least half of the printer
resolution being used. The higher the scan resolution, the
more detailed the copy output (as long as the printer resolution
being used is double the scan resolution). Also, a higher scan
resolution increases copying time, because of the increased
amount of data that must be scanned and sent to the
printer for processing. (Each time the scan resolution is
doubled, the amount of information that is scanned and
printed is quadrupled.)
EDNord - Istedgade 37A - 9000 Aalborg - telefon [phone]