User`s guide

Using Remote
Console
4-13
CrownAdmin 3
» Note:
When accessing the input and output trays on the selected
printer, you must add a 1 to each tray number to select the correct
tray. Normally, the trays on QMS printers are numbered consecutively
(1,2,3). From CrownAdmin 3 you must access these trays as 2, 3, 4.
See your printer documentation for more information on input and
output tray numbers.
Using Remote Console
Remote Console allows you to access printer information and change
printer configuration settings from anywhere on the network.
» Note:
After using Remote Console on the Macintosh, close the
Remote Console session. You will not be able to print over the
network until the Remote Console session has ended.
Use this button for
configuring QMS
print systems that
are CrownNet
enabled.
Use this button for
statusing QMS and
other vendors’ print
systems via the
standard MIB.
Other buttons can appear representing other vendors.
Use this button to configure products that support a partic-
ular MIB.
Button Description Button Description