User`s guide

Opening
CrownAdmin 3
4-7
CrownAdmin 3
5 In the Max. Printer Entry box, type the maximum number of
printers you want to display in the list box.
The range is 64-1000. The default is 64.
6 By default, zones as well as printers are scanned. If you do
not want zones scanned, deselect Rescan Zones.
7 Click OK to return to the CrownAdmin 3 desktop.
Naming the Printer
Your printer’s default name on a network is the model, such as the
QMS 2425 Print System. However, each printer on an EtherTalk net-
work must have a unique name. CrownNet provides a utility to set the
printer name if more than one printer of the same model is on the net-
work.
Use the following procedure to set the printer’s name. If necessary,
choose the Help button to see on-line help.
1 From the Network menu choose Set Printer Name.
The shortcut for this procedure is Command-N.
2 In the box at the top of the dialog box, select the printer you
want to rename.
» Note:
If the appropriate printer doesn’t display in the box, click
the Scan... button to rescan the network for available printers.
3 Type a new name for the printer in the New Name box.
All characters except : and @ are valid.
4 Click the Scan... button to rescan the network for available
printers.
The printer must reset itself after name is changed, so rescanning
is necessary to display the renamed printer in the Printers box.
5 Choose OK.