User`s guide

Opening
CrownAdmin 3
QMS CrownNet System Administrator's Manual4-6
6 Click the Scan... button to rescan the network for available
printers.
The printer must reset itself after the zone is changed, so rescan-
ning is necessary to display the reset printer in the Printers box.
7 Choose the Done button to return to the CrownNet window.
Using Filters
Since CrownNet supports Phase 2 Ethernet, which allows multiple
logical zones on a single network, and because you have up to 64K
nodes on an EtherTalk network, it may be difficult to find a particular
printer. The Filters option helps you locate a printer on the network.
1 From the Options menu choose Preferences...
2 In the Filter Specification box, type the name of the printer.
n The maximum length of the name is 32 characters.
n The = wildcard character matches all possible characters (for
example, = alone specifies all printers in the selected zone[s],
and m= selects all printers starting with “m.”
n The ≈ wildcard character matches any or no characters. For
example, m≈g selects printers named “mg,” “meg,” “mktg,”
“marketing,” and so on.
3 In the EtherTalk Zones box select a zone name.
n To select a single zone, click on it.
n To select a range of zones, click on the first one then hold
down the Shift key and click on the last one.
n To select several noncontiguous zones, click on the first one
and then hold down the Option key and click on each other
zone.
4 In the Max. Scan Time box type the maximum number of sec-
onds you want the system to look for printers.
The range is 5-300 seconds. The default is 5 seconds.