User`s guide

About
CrownAdmin 3
4-3
CrownAdmin 3
About CrownAdmin 3
CrownAdmin is a software utility that allows you to monitor and con-
figure QMS printers and perform network operations on printers con-
nected to Ethernet or Token-Ring. Some of the things you can do
through CrownAdmin 3 include the following:
n Configure network protocols on the printer interface daughter-
board.
n Configure printer parameters
n Define groups of printers with common characteristics so you can
easily make global configuration changes.
n Use SNMP (where available) for retrieving and setting up printer
information.
n Download printer system software, fonts, forms, etc.
n Control PostScript files through the PS Utilities dialog box.
n Format and print files.
n Check printer status.
n Configure settings on the printer.
n Use QMS Remote Console.
n Create and edit group-configuration templates.
For more information, see the CrownAdmin 3 online help. Instructions
for accessing the user’s guide can be found later in this chapter.
Opening CrownAdmin 3
» Note: In NetBEUI/NetBIOS environments, there is an autodiscovery
mode in which printers are polled, so you’ll notice a short delay when
opening CrownAdmin.