User`s guide

Using Remote
Console
3-3
CrownAdmin for DOS
1 In the list of printers, double-click on the printer name.
» Note:
If the appropriate printer isn’t displayed in the list, rescan
the network for available printers by choosing Re-Scan from the
Scan menu or by choosing the Re-scan button on the toolbar.
Also, verify that filters are not preventing the printer name from
being listed.
2 To open Remote Console, use one of the following methods:
n From the Display menu choose Run Remote Console, or
n Choose the Remote Console button on the toolbar.
» Note:
If Remote Console is not supported on the selected printer,
the menu entry and button are grayed out.
CrownAdmin closes the dialog box and opens a terminal window
for the Remote Console session. Refer to the
QMS Crown
Remote Console User’s Guide
for more information on using
Remote Console.
Multiple Remote Console Sessions
You can open multiple Remote Console sessions on multiple printers,
depending on the amount of memory available on your PC. To open
another Remote Console window while one is already open, repeat
the steps listed in “Accessing Remote Console.”
When multiple Remote Console windows are open, the title of each
window contains the printer’s name (for example, “QMS 4525 Remote
Console”).
Closing a Remote Console Session
There are two ways to close a Remote Console session:
n Type quit↵ at the prompt.
n Click the Remote Console window’s control box and select close.