User`s guide

Introduction
QMS CrownNet System Administrator's Manual3-2
Introduction
This chapter explains how to open and close CrownAdmin for DOS
on the PC and how to access Remote Console.
» Note:
CrownAdmin for DOS only works with CrownNet version
2.05 or earlier versions.
Opening CrownAdmin
Use the following procedure to open CrownAdmin for DOS:
1 Make sure the CrownAdmin directory is in the path, or
change to the CrownAdmin directory.
If necessary, refer to your DOS manual for information on editing
the DOS path command in the AUTOEXEC.BAT file.
2 At the DOS prompt, type
cadm4dos
↵
Using Remote Console
Remote Console allows you to access printer information and change
printer configuration settings from anywhere on the network.
Accessing Remote Console
Use the following procedure to access Remote Console. If necessary,
choose the Help button to see on-line help.