User`s guide

Configuring the TCP/IP
Protocol
2-55
Printer Interface Configuration
Disabling the RARP Protocol
The RARP menu allows you to enable or disable the RARP protocol.
Configuring SNMP Information
SNMP (Simple Network Management Protocol) is a standard protocol
used to monitor devices and the networks to which they attach. (See
appendix C, “SNMP and TCP/IP Concepts,” for more information on
SNMP.)
The SNMP NMS 1, SNMP NMS 2, SNMP NMS 3, SNMP NMS 4,
SNMP NMS 5 menus allow you to identify and configure up to five
Network Management Stations (NMSs)—NMS 1 through NMS 5. You
must provide the following information about each NMS that you want
to be able to access the printer: Internet address, community name,
and access.
Menu Administration/Communications/Resident NIC/CrownNet/
TCPIP/Protocol/RARP
Administration/Communications/Optional NIC/CrownNet/
TCPIP/Protocol/RARP
Choices Enabled—Enables the RARP protocol.
Disabled—Disables the RARP protocol.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx
NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx
is
either Resident or Optional).