User`s guide

Configuring the TCP/IP
Protocol
2-53
Printer Interface Configuration
Assigning a TCP/IP Port
Some application environments have identical port assignments to
the QMS TCP/IP interface. The Port Assignment menu allows you to
assign a port number to the QMS TCP/IP interface to provide compat-
ibility with these other environments.
Once entered, the requested port number assignment is checked
against those currently assigned. If the requested port number
coincides with a port number already in use by the TCP/IP interface,
the error message INCORRECT VALUE is displayed in the printer
control panel message window or on the remote console.
» Note:
If you change the port number in the Port Assignment menu,
you must also change the port number used in the UNIX Host
Software.
Menu Administration/Communications/Resident NIC/CrownNet/
TCPIP/Port Assignment
Administration/Communications/Optional NIC/CrownNet/
TCPIP/Port Assignment
Choices 1-9999
Default 35
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).
Notes This value must be unique and must not be used by any other
services, such as ftp, telnet, and rlogin.
The QMS UNIX Host Software must be configured to the same
port number.