User`s guide

Configuring the TCP/IP
Protocol
QMS CrownNet System Administrator's Guide2-52
Setting an Accounting Timeout
The Accnting Timeout menu allows you to set the number of seconds
the CrownNet interface waits for a terminating acknowledgment from
the host before allowing another connection.
Menu Administration/Communications/Resident NIC/CrownNet/
TCPIP/AccntingRevChan
Administration/Communications/Optional NIC/CrownNet/
TCPIP/AccntingRevChan
Choices Enabled—Enables TCP/IP accounting and reverse channel
communications and sends accounting information back to
the host via UDP packets.
Disabled—Disables TCP/IP accounting and reverse channel
communications.
Default Disabled
Effectivity Changes to this menu take effect as soon as you put the
printer back on line.
Notes Because the accounting feature relays the number of pages
printed for each print job, using On Idle spooling
[Administration/Communications/
xxxxxxxx NIC/CrownNet/
Common/Spooling menu (where
xxxxxxxx is either Resident or
Optional)] to define discrete job boundaries is required to
ensure that all pages in a job have been counted before the
next job begins printing. Therefore, selecting Enabled enables
accounting and automatically sets Spooling to On Idle.
Conversely, if Spooling is set to On or On Input Idle, the
Accnting/RevChan menu is automatically set to Disabled.
Menu Administration/Communications/Resident NIC/CrownNet/
TCPIP/Accnting Timeout
Administration/Communications/Optional NIC/CrownNet/
TCPIP/Accnting Timeout
Choices 005-600 sec. (5 sec.-10 min.)
Default 15 sec.
Effectivity Changes to this menu take effect as soon as you put the
printer back on line.