User`s guide

Configuring the TCP/IP
Protocol
2-49
Printer Interface Configuration
Setting the Default Router Address
The Default Router menu allows you to set the Internet address of the
default router. The address has the form 000.000.000.000. Each trip-
let is a number from 001 to 255. If gateways are not used with your
network, the gateway address should be 000.000.000.000 (the fac-
tory default). Check with your network administrator. See appendix C,
“SNMP and TCP/IP Concepts,” for more information on gateways and
internet routing.
Guidelines
Keep the following guidelines in mind when setting the Internet
address:
n The address must consist only of numbers and periods. Selecting
a letter or another symbol results in an error message.
n Any
xxx value between 10 and 99 must begin with 0 (for example,
10 is entered as 010 and 99 is entered as 099).
n Any
xxx value between 1 and 9 must begin with 00 (for example,
1 is entered as 001 and 9 is entered as 009).
Menu Administration/Communications/Resident NIC/CrownNet/
TCPIP/Default Router
Administration/Communications/Optional NIC/CrownNet/
TCPIP/Default Router
Choices Each
xxx triplet can have a value from 001 to 255.
Default 000.000.000.000
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).