User`s guide

Configuring the TCP/IP
Protocol
2-45
Printer Interface Configuration
802.5 IPX Addr for Token-Ring
Configuring the TCP/IP
Protocol
This section describes in detail the configuration options available in
the Administration/Communications/
xxxxxxxx NIC/CrownNet/TCP/IP
menu
(where xxxxxxxx is either Resident or Optional):
n Protocol—Allows you to enable and disable the TCP/IP protocol.
n Internet Address—Allows you to assign a network address to
the printer.
n Subnet Mask—Allows you to set the subnet mask.
n Default Router—Allows you to specify the Internet address for
the default router.
n Remove Passwords—Allows you to delete the FTP password
file on the printer.
n Remove Hosts—Allows you to delete the host file on the printer.
n Secure Files—Allows you to lock the password and host files on
the printer.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Frame Type/802.5 IPX Addr
Administration/Communications/Optional NIC/CrownNet/
NetWare/Frame Type/802.5 IPX Addr
Choices Enabled—Enables the frame type.
Disabled—Disables the frame type.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).