User`s guide

Configuring the NetWare

Protocol

2-43

Printer Interface Configuration

Setting the Frame Type

The printer automatically detects the frame types used on the net-

work. However, if you don’t want the printer to see all of them, you can

disable one or more in the appropriate menu:

n 802.3 IPX Addr[ess]

n Ether2 IPX Addr[ess]

n 802.2 IPX Addr[ess]

n SNAP IPX Addr[ess]

n 802.5 IPX Addr[ess]

802.3 IPX Addr for Ethernet

Ether2 IPX Addr for Ethernet

Menu Administration/Communications/Resident NIC/CrownNet/

NetWare/Frame Types/802.3 IPX Addr

Administration/Communications/Optional NIC/CrownNet/

NetWare/Frame Types/802.3 IPX Addr

Choices Enabled—Enables the frame type.

Disabled—Disables the frame type.

Default Enabled

Effectivity The CrownNet interface must be reset for changes to take

effect. Use the Administration/Communications/

xxxxxxxx

NIC/

CrownNet/Common/Soft Reset menu (where