User`s guide

Configuring the NetWare
Protocol
QMS CrownNet System Administrator's Guide2-42
Guidelines
Keep the following in mind when naming the printer:
n Printer names may be up to 47 characters long. If the printer
name has more than 16 characters, enter the first 16 characters
in the Name[1] menu and then up to 16 additional characters in
the Name[2] menu. If a print server name has more than 32 char-
acters, enter up to 15 additional characters in the Name[3] menu.
n Only uppercase characters are allowed.
n Spaces are not allowed in printer names. The first space found
ends the name even if you enter other characters to the right of
the space. These subsequent characters are cleared to spaces.
n You can use an underscore character ( _ ) to create a name con-
sisting of more than one word. For example, you may want to
name the printer
PROGRAM_MGT
Default
The Default option allows you to reset the printer name to the default.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Printer Name/Default
Administration/Communications/Optional NIC/CrownNet/
NetWare/Printer Name/Default
Choices No—Leaves the printer name as identified in the
Administration/Communications/
xxxxxxxx NIC/CrownNet/
NetWare/Printer Name/Name 1, Name 2, and Name 3
menus (where xxxxxxxx is either Resident or Optional).
Yes—Sets the name back to the QMS default printer name.
Default <blank>
Effectivity Changes take effect as soon as the printer is put back on line.
Notes No two printers on a network may have the same name.