User`s guide

Configuring the NetWare
Protocol
2-39
Printer Interface Configuration
Naming the Print Server
The PServer Name[1], PServer Name[2], and PServer Name[3]
options allow you to identify the name of the print server serving the
remote printer.
» Note:
The print server identified in this menu may not be CrownNet’s
internal print server (Administration/Communications/CrownNet/
NetWare/Config PServer/PServer Name [1], PServer Name[2], and
PServer Name [3] menus.
Guidelines
Keep the following in mind when naming the print server:
n Print server names may be up to 47 characters long in NetWare
versions 3.
x . In Netware version 4. x name and context may be as
long as 256 characters. Only 47 characters can be entered
through the printer configuration menu. If you wish to enter
names greater than 47 characters you must use host based con-
figurations such as CrownAdmin 3. For NetWare versions 3.
x , if
the print server name has more than 16 characters, enter the first
16 characters in the PServer Name[1] menu and then up to 16
additional characters in the PServer Name[2] menu. If a file
server name has more than 32 characters, enter up to 15 addi-
tional characters in the PServer Name[3] menu.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/RN Printer/PServer Name[1], PServer Name[2],
PServer Name[3]
Administration/Communications/Optional NIC/CrownNet/
NetWare/RN Printer/PServer Name[1], PServer Name[2],
PServer Name[3]
Choices Up to 47 characters (see “Guidelines,” below)
Default <blank>
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).