User`s guide

Configuring the NetWare
Protocol
2-37
Printer Interface Configuration
Guidelines
Keep the following in mind when naming PServer Context:
n In NetWare version 4.
x, names may be as long as 256 charac-
ters. Only 47 characters can be entered through the printer con-
figuration menu. If you want to enter names greater than 47
characters you must use host-based configurations, such as
CrownAdmin 3. If the PServer Context name has more than 16
characters, enter the first 16 characters in the PServer Context[1]
menu and then up to 16 additional characters in the PServer Con-
text[2] menu. If a PServer Context name has more than 32 char-
acters, enter up to 15 additional characters in the PServer
Context[3] menu.
n Only uppercase characters are allowed.
n A space is used to separate the name of the file server from the
print server context.
n You can use a period (.) to create a name consisting of more than
one word. The period could be used to separate the levels of con-
text. For example, to identify a print server named PRINTSERV2.
SALES. QMS, you would display
QMS-4 PRINTSERV2.SALES.QMS
» Note:
If you want to assign more than 14 characters to the file
server name you must use CrownAdmin 3 to enter the name.
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional.
Notes The file server name must be contained within the first 16
characters. If the name you are entering is longer than 14
characters you must use the CrownAdmin 3 Edit Settings
menu to enter the name.