User`s guide

Configuring the NetWare
Protocol
QMS CrownNet System Administrator's Guide2-36
Setting Burst Mode
Setting burst mode allows you to enable or disable NCP burst mode,
which allows very high speed data transfer in NetWare networks.
Naming the NDS Print Server
The PServer Context[1], PServerPServer Context[2], and PServer
Context[3] options allow you to identify the name of the NDS configu-
ration file server and the print server context. the format for the option
is file server name first, followed by a a space, and then the print
server context. For example, if the configuration file server name is
QMS-4 and the print server context is printserv2.sales.qms, the entry
would be
QMS-4 PRINTSERV2.SALES.QMS
Up to 16 characters can be entered in the PServer Context[1] field,
and additional 16 characters in PServer Context[2], and an additional
15 characters in PServer Context[3]
» Note:
If you want to assign more than 14 characters to the file server
name you must use CrownAdmin 3 to enter the name.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Config PServer/Burst Mode
Administration/Communications/Optional NIC/CrownNet/
NetWare/Config PServer/Burst Mode
Choices Enabled/Disabled
Default Enabled
Effectivity Changes in this menu take effect as soon as the printer is put
back on line.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Config PServer/PServer Context[X]
Administration/Communications/Optional NIC/CrownNet/
NetWare/Config PServer/PServer Context[X]
Choices Up to 47 characters (see “Guidelines,” below)
Default [Blank]