User`s guide

Configuring the NetWare
Protocol
2-35
Printer Interface Configuration
Setting the Job Check Delay
The Job Check Delay option allows you to select the number of sec-
onds between times that the print server checks each print queue for
print jobs. This can be used to limit network traffic. Keep in mind the
longer the delay the longer the time that a queued job is released for
printing and the time that a Print Server begins to print the job.
Configuring Check Delay
The Conf Check Delay option allows you to configure the time interval
that the print server on the CrownNet interface will broadcast to check
its connection. This broadcast checks the network configuration to
see if any changes have been made.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Config PServer/Job Check Delay
Administration/Communications/Optional NIC/CrownNet/
NetWare/Config PServer/Job Check Delay
Choices 1-60 seconds
Default 15 seconds
Effectivity Changes in this menu take effect as soon as the printer is put
back on line.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Config PServer/Conf Check Delay
Administration/Communications/Optional NIC/CrownNet/
NetWare/Config PServer/Conf Check Delay
Choices 0-65535 seconds
Default 300 seconds
Effectivity Changes in this menu take effect as soon as the printer is put
back on line.
Notes 0 = disabled