User`s guide

Configuring the NetWare
Protocol
QMS CrownNet System Administrator's Guide2-34
Naming the Bindery Print Server
The PServer Name[1], PServer Name[2], and PServer Name[3]
options allow you to identify the name of the CrownNet internal print
server.
Guidelines
Keep the following in mind when naming the bindery print server:
n Print server names may be up to 47 characters long using Net-
ware 3.x. If the print server name has more than 16 characters,
enter the first 16 characters in the PServer Name[1] menu and
then up to 16 additional characters in the PServer Name[2] menu.
If a file server name has more than 32 characters, enter up to 15
additional characters in the PServer Name[3] menu.
n Only uppercase characters are allowed.
n Spaces are not allowed in print server names. The first space
found ends the name even if you enter other characters to the
right of the space. These subsequent characters are cleared to
spaces.
n You can use an underscore character ( _ ) to create a name con-
sisting of more than one word. For example, you could name the
print server as
QMS_PSERVER_MARKETNGPSER
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Config PServer/PServer Name[1], PServer Name[2],
PServer Name[3]
Administration/Communications/Optional NIC/CrownNet/
NetWare/Config PServer/PServer Name[1], PServer Name[2],
PServer Name[3]
Choices Up to 47 characters (see “Guidelines,” below)
Default [Blank]
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).