User`s guide

Configuring the NetWare
Protocol
2-33
Printer Interface Configuration
characters, enter up to 15 additional characters in the File Srv
Name[3] menu.
n Only uppercase characters are allowed.
n Spaces are not allowed in file server names. The first space
found ends the name even if you enter other characters to the
right of the space. These subsequent characters are cleared to
spaces.
n You can use an underscore character ( _ ) to create a name con-
sisting of more than one word. For example, to create a file server
called Marketing_Server, you would display
MARKETING_SERVER
Resetting the File Server Name
The Default menu allows you to reset the file server name to the
default.
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Config PServer/Default
Administration/Communications/Optional NIC/CrownNet/
NetWare/Config PServer/Default
Choices No—Leaves the file server name as identified in the
Administration/Communications/
xxxxxxxx NIC/CrownNet/
NetWare/Config PServer/File Srv Name 1, File Srv Name
2, and File Srv Name 3 menus (where xxxxxxxx is either
Resident or Optional).
Yes—Resets the file server name to the default.
Default No
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).