User`s guide

Configuring the NetWare
Protocol
QMS CrownNet System Administrator's Guide2-30
Enabling the NetWare Protocol
The Protocol menu allows you to enable or disable the NetWare pro-
tocol.
Configuring the Print Server
The Config PServer menu provides information about the printer’s
internal print server. The printer’s internal print server can be config-
ured as a NetWare 3.
x bindery print server and as a NetWare 4. x
NDS print server.
» Note:
This print server services its own attached printer. It does not
support other remote printers on the network. The eight configurable
remote printers must be serviced by additional print servers located
elsewhere on the network.
The following options are available:
n File Srv Name[1]
n File Srv Name[2]
n File Srv Name[3]
n Default
n PServer Name[1]
n PServer Name[2]
Menu Administration/Communications/Resident NIC/CrownNet/
NetWare/Protocol
Administration/Communications/Optional NIC/CrownNet/
NetWare/Protocol
Choices Enabled—Enables the NetWare protocol.
Disabled—Disables the NetWare protocol.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).