User`s guide

Configuring the NetWare
Protocol
2-29
Printer Interface Configuration
Because it is based on the unique, network address of the CrownNet
interface, this password prevents unauthorized printers from access-
ing private print queues by using the name of a print server autho-
rized to access those queues. Only one CrownNet interface will
generate the correct password associated with a specific print server
name.
Reassigning a Password
Once a CrownNet print server name has been assigned to a printer, if
the print server name is reassigned to a different printer, the print
server password must be reset to allow the new printer to connect to
the file server.
Use the following procedure to reassign a password.
» Note:
This procedure must be repeated on each file server that has
been serviced by the CrownNet print server.
1 Open PConsole.
2 From the Available Options list select Print Server
Information.
3 From the Print Servers list select the print server.
4 From the Print Server Information list select Password.
5 Make sure the cursor is in the leftmost position and press
Enter to set the new password.
6 Make sure the cursor remains in the leftmost position and
press Enter again to verify the new password.
7 Exit from PConsole.
The password has been reset, and the print server name may be
used by another printer.
» Note:
You can also clear the password through CrownAdmin 3.