User`s guide

Configuring the NetWare
Protocol
QMS CrownNet System Administrator's Guide2-28
Configuring the NetWare
Protocol
This section explains how the CrownNet interface provides security in
the NetWare environment, and it describes in detail each of the con-
figuration options available in the Administration/Communications/
xxxxxxxx NIC/CrownNet/NetWare menu (where xxxxxxxx is either
Resident or Optional)
:
n Protocol—Allows you to enable and disable the NetWare proto-
col.
n Config PServer—Allows you to provide information about the
printer's internal print server and configure the print server in
bindery mode or NDS mode.
n R/N Printer #1-R/N Printer #8—Allows you to supply the network
with information about the remote/network printer
n Printer Name—Allows you to specify the name by which the
printer is known on the network.
n Frame Type—Allows you to specify the frame type used by the
NetWare interface.
» Note:
The preferred method of configuring the NetWare interface is
through CrownAdmin 3 for Windows utility.
About the CrownNet Security Feature
Through the implementation of a print server password, the CrownNet
print server prevents unauthorized access to private print queues.
The first time the CrownNet print server attaches to a file server, the
CrownNet interface automatically creates a hidden password for the
CrownNet print server and stores it in encrypted form on the file
server. Each subsequent time the CrownNet print server attaches to
the file server, the hidden, encrypted password is used.