User`s guide

Configuring the OS/2
LAN Manager/LAN Server
or Microsoft Windows
Protocol
QMS CrownNet System Administrator's Guide2-26
Enabling the OS/2 LAN Manager/LAN Server
or Microsoft Windows Network Protocol
The Protocol menu allows you to enable or disable the OS/2 LAN
Manager/LAN Server or Microsoft Windows Network protocol.
Naming the Printer
One unique printer name is broadcast to the network for printer identi-
fication. However, multiple connections to this one printer are possi-
ble. The Printer Name menu allows you to provide a printer name up
to 16 characters long.
Menu Administration/Communications/Resident NIC/CrownNet/Lan
Manager/Protocol
Administration/Communications/Optional NIC/CrownNet/Lan
Manager/Protocol
Choices Enabled—Enables the
NetBEUI/NetBIOS protocol.
Disabled—Disables the
NetBEUI/NetBIOS protocol.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional), or restart the printer.
Menu Administration/Communications/Resident NIC/CrownNet/Lan
Manager/Printer Name
Administration/Communications/Optional NIC/CrownNet/Lan
Manager/Printer Name
Choices See the “Guidelines” below
Default QMS_
hwaddress where hwaddress is the hardware address
set in the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/HW Address menu (where
xxxxxxxx is
either Resident or Optional).
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional), or you must restart the printer.
Notes No two printers on a network may have the same printer name.