User`s guide

Configuring the OS/2
LAN Manager/LAN Server
or Microsoft Windows
Protocol
2-25
Printer Interface Configuration
Default
The Default option allows you to reset the zone name (Zone Part 1
and Zone Part 2) to the default.
Configuring the OS/2 LAN
Manager/LAN Server or
Microsoft Windows Protocol
This section describes in detail the configuration options available in
the Administration/Communications/
xxxxxxxxx NIC/CrownNet/Lan
Manager menu
(where xxxxxxxx is either Resident or Optional):
n Protocol—Allows you to enable or disable the NetBEUI/NetBIOS
protocol.
n Printer Name—Provide a name for the printer on the network.
n Default—Allows you to reset the printer name to the default.
Menu Administration/Communications/Resident NIC/CrownNet/
EtherTalk/Zone Name/Default
Administration/Communications/Optional NIC/CrownNet/
EtherTalk/Zone Name/Default
Choices No—Leaves the zone name as identified in the Administration/
Communications/
xxxxxxxx NIC/CrownNet/EtherTalk/Zone
Name/Zone Part 1 and Zone Part 2 menus (where
xxxxxxxx is either Resident or Optional).
Yes—Resets the zone name to the default.
Default No
Effectivity Changes take effect as soon as the printer is put back on line.