User`s guide

Configuring the
EtherTalk Protocol
QMS CrownNet System Administrator's Guide2-20
QMS RC Res [Remote Console Responder]
The QMS RC Res option determines how the CrownNet interface
registers itself for Remote Console access.
HP Zoner Res [Responder]
The HP Zoner Res option determines how the CrownNet interface
registers itself for certain EtherTalk zone-changing applications.
Menu Administration/Communications/Resident NIC/CrownNet/
EtherTalk/Network Ident/QMS RC Res
Administration/Communications/Optional NIC/CrownNet/
EtherTalk/Network Ident/QMS RC Res
Choices Disabled—Disables the CrownNet interface from responding
to network look-up requests for type
“QMS_REMOTE_CONSOLE.”
Enabled—Enables the CrownNet interface to respond to
network look-up requests for type
“QMS_REMOTE_CONSOLE.” This allows Macintosh
applications to determine which EtherTalk devices support
QMS Remote Console functionality.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx
NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx
is
either Resident or Optional).
Menu Administration/Communications/Resident NIC/CrownNet/
EtherTalk/Network Ident/HP Zoner Res
Administration/Communications/Optional NIC/CrownNet/
EtherTalk/Network Ident/HP Zoner Res
Choices Enabled—Enables the CrownNet interface to respond to
network look-up requests for type “HP Zoner Responder.”
This allows the Macintosh application to determine which
EtherTalk devices support this zone changing functionality.
Disabled—Disables the CrownNet interface from responding
to network look-up requests for type “HP Zoner
Responder.”