User`s guide

Configuring the
EtherTalk Protocol
2-19
Printer Interface Configuration
Identifying Network Settings
Use the Network Ident menu to specify the type(s) of responses sent
to the network. Three options are available:
n LaserWriter
n QMS R[emote] C[onsole] Res[ponder]
n HP Zoner Res[ponder]
LaserWriter
The LaserWriter option identifies how the QMS CrownNet interface
registers itself on the network for normal printing.
Menu Administration/Communications/Resident NIC/CrownNet/
EtherTalk/Network Ident/LaserWriter
Administration/Communications/Optional NIC/CrownNet/
EtherTalk/Network Ident/LaserWriter
Choices Disabled—Disables the CrownNet interface from responding
to network look-up requests for type “LaserWriter.”
Enabled—Enables the CrownNet interface to respond to
network look-up requests for type “LaserWriter.”
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).