User`s guide

Configuring the
EtherTalk Protocol
QMS CrownNet System Administrator's Guide2-18
Configuring the EtherTalk
Protocol
This section describes in detail the configuration options available in
the Administration/Communications/
xxxxxxxx NIC/CrownNet/Ether-
Talk menu (where
xxxxxxxx is either Resident or Optional):
n Protocol—Allows you to enable or disable the EtherTalk protocol.
n Network Ident[ification]—Allows you to specify the types of
responses sent to the network.
n Connection—Allows you to select the appropriate type of con-
nection between the Macintosh and the printer.
n Zone Name—Allows you to display and set the EtherTalk zone.
Enabling the EtherTalk Protocol
Use the Protocol menu to enable or disable the EtherTalk protocol.
Menu Administration/Communications/Resident NIC/CrownNet/
EtherTalk/Protocol
Administration/Communications/Optional NIC/CrownNet/
EtherTalk/Protocol
Choices Disabled—Disables access to the printer via the EtherTalk
protocol.
Enabled—Enables access to the printer via the EtherTalk
protocol.
Default Enabled
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).