User`s guide

Configuring Common
Interface Characteristics
2-13
Printer Interface Configuration
Using a Soft Reset
The Soft Reset menu allows you to reset the QMS CrownNet inter-
face (not the entire printer). It is used to put certain CrownNet inter-
face configuration changes into effect.
Setting the Token-Ring Speed
The Ring Speed menu allows you to select the speed of the Token-
Ring interface.
» Note:
This menu is applicable to Token-Ring configuration only.
Notes Choosing Yes resets only the CrownNet interface configuration
settings to their factory default. It does not reset the whole
printer configuration menu.
The Internet and HW addresses are not changed.
Menu Administration/Communications/Resident NIC/CrownNet/
Common/Soft Reset
Administration/Communications/Optional NIC/CrownNet/
Common/Soft Reset
Choices No—Does not reset the CrownNet interface.
Yes—Resets the CrownNet interface.
Default No
Effectivity Changes to this menu take effect as soon as the printer goes
idle.
Notes Make sure that you have set up a printer name under the
interface menu before you do a soft reset.
Menu Administration/Communications/Resident NIC/CrownNet/
Common/Ring Speed
Administration/Communications/Optional NIC/CrownNet/
Common/Ring Speed
Choices 4 Mbit/Sec
16 Mbit/Sec