User`s guide

Configuring Common
Interface Characteristics
QMS CrownNet System Administrator's Guide2-12
Printing a Configuration Page
The Config Page menu allows you to print the QMS CrownNet inter-
face’s internally generated configuration pages. These pages include
information on the configuration of all protocols on the CrownNet
interface.
Resetting Factory Defaults
The Factory Reset menu allows you to reset all QMS CrownNet inter-
face configuration settings (except the Internet and HW addresses) to
their factory default values.
Menu Administration/Communications/Resident NIC/CrownNet/
Common/Config Page
Administration/Communications/Optional NIC/CrownNet/
Common/Config Page
Choices No—Does not print a configuration page.
Yes—Prints a configuration page.
Default No
Effectivity The status page is sent to the print engine as soon as the
printer is put back on line. You must put the printer back on line
within 20 seconds after selecting a configuration page.
Menu Administration/Communications/Resident NIC/CrownNet/
Common/Factory Reset
Administration/Communications/Optional NIC/CrownNet/
Common/Factory Reset
Choices No—Does not reset all configuration settings to their factory
default.
Yes—Resets all configuration settings to their factory default.
Default No
Effectivity The CrownNet interface must be reset for changes to take
effect. Use the Administration/Communications/
xxxxxxxx NIC/
CrownNet/Common/Soft Reset menu (where
xxxxxxxx is
either Resident or Optional).