User`s guide

Configuring Common
Interface Characteristics
2-9
Printer Interface Configuration
Configuring Common Interface
Characteristics
This section describes in detail the configuration options available in
the Administration/Communications/
xxxxxxxx NIC/CrownNet/Com-
mon menu (where
xxxxxxxx is either Resident or Optional):
n Spooling—Allows you to control how print jobs accepted over the
CrownNet interface are spooled and sent to the printer.
n H[ard]W[are] Address—Allows you to override the factory-
default hardware address.
n Config[uration] Page—Allows you to print the CrownNet inter-
face’s internally generated configuration page.
n Factory Reset—Allows you to reset all the CrownNet configura-
tion settings (except the hardware and Internet address) to their
factory defaults.
n Soft Reset—Allows you to reset the CrownNet interface.
n Ring Speed (Token-Ring networks only)—Allows you to select
the Token-Ring network speed.
n Source Routing (Token-Ring networks only)—Allows you to
identify the source routing type to be used.
n Ethernet Speed—Allows you to select the Ethernet network
speed.