User`s guide

Configuring Network
Interface Characteristics
2-5
Printer Interface Configuration
Selecting a Default Emulation
Use the Emulation menu to select the default emulation (from those
installed on the printer) for print jobs received over the interface.
Menu Administration/Communications/Resident NIC/Emulation
Administration/Communications/Optional NIC/Emulation
Typical
Choices
CCITT—CCITT Groups 3 and 4 emulation.
ESP—Emulation Sensing Processor technology. Using a form
of artificial intelligence, ESP technology analyzes incoming
file data from the interface and determines which
emulation, from those installed on the printer, to use to
print the job.
Hexdump—Hexdump. This emulation prints the hexadecimal
values of all non-protocol bytes (those that are part of the
original file) received over the interface.
HPGL—HP-GL emulation.
Lineprinter—Line printer output.
LN03+—DEC LN03 Plus emulation.
PCL4—HP PCL 4 emulation.
PCL5—HP PCL 5 emulation.
PostScript—PostScript Level 1 and Level 2 emulations.
QUIC II—QMS QUIC II language.
Default Printer-dependent; however, the typical default is ESP.
Effectivity Changes take effect on the next print job.
Notes Choices in this menu are printer-dependent. Those listed
above are only typical choices. Emulation can appear under
the Common menu on some printers.